CUDA Runtime API :: CUDA Toolkit Documentation

3.7. Memory Management

This section describes the memory management functions of the CUDA runtime application programming interface.

Some functions have overloaded C++ API template versions documented separately in the C++ API Routines module.

Functions

cudaError_t cudaArrayGetInfo ( cudaChannelFormatDesc* desc, cudaExtent* extent, unsigned int* flags, cudaArray_t array ): Gets info about the specified cudaArray.
cudaError_t cudaFree ( void* devPtr ): Frees memory on the device.
cudaError_t cudaFreeArray ( cudaArray_t array ): Frees an array on the device.
cudaError_t cudaFreeHost ( void* ptr ): Frees page-locked memory.
cudaError_t cudaFreeMipmappedArray ( cudaMipmappedArray_t mipmappedArray ): Frees a mipmapped array on the device.
cudaError_t cudaGetMipmappedArrayLevel ( cudaArray_t* levelArray, cudaMipmappedArray_const_t mipmappedArray, unsigned int level ): Gets a mipmap level of a CUDA mipmapped array.
cudaError_t cudaGetSymbolAddress ( void** devPtr, const void* symbol ): Finds the address associated with a CUDA symbol.
cudaError_t cudaGetSymbolSize ( size_t* size, const void* symbol ): Finds the size of the object associated with a CUDA symbol.
cudaError_t cudaHostAlloc ( void** pHost, size_t size, unsigned int flags ): Allocates page-locked memory on the host.
cudaError_t cudaHostGetDevicePointer ( void** pDevice, void* pHost, unsigned int flags ): Passes back device pointer of mapped host memory allocated by cudaHostAlloc or registered by cudaHostRegister.
cudaError_t cudaHostGetFlags ( unsigned int* pFlags, void* pHost ): Passes back flags used to allocate pinned host memory allocated by cudaHostAlloc.
cudaError_t cudaHostRegister ( void* ptr, size_t size, unsigned int flags ): Registers an existing host memory range for use by CUDA.
cudaError_t cudaHostUnregister ( void* ptr ): Unregisters a memory range that was registered with cudaHostRegister.
cudaError_t cudaMalloc ( void** devPtr, size_t size ): Allocate memory on the device.
cudaError_t cudaMalloc3D ( cudaPitchedPtr* pitchedDevPtr, cudaExtent extent ): Allocates logical 1D, 2D, or 3D memory objects on the device.
cudaError_t cudaMalloc3DArray ( cudaArray_t* array, const cudaChannelFormatDesc* desc, cudaExtent extent, unsigned int flags = 0 ): Allocate an array on the device.
cudaError_t cudaMallocArray ( cudaArray_t* array, const cudaChannelFormatDesc* desc, size_t width, size_t height = 0, unsigned int flags = 0 ): Allocate an array on the device.
cudaError_t cudaMallocHost ( void** ptr, size_t size ): Allocates page-locked memory on the host.
cudaError_t cudaMallocManaged ( void** devPtr, size_t size, unsigned int flags ): Allocates memory that will be automatically managed by the Unified Memory system.
cudaError_t cudaMallocMipmappedArray ( cudaMipmappedArray_t* mipmappedArray, const cudaChannelFormatDesc* desc, cudaExtent extent, unsigned int numLevels, unsigned int flags = 0 ): Allocate a mipmapped array on the device.
cudaError_t cudaMallocPitch ( void** devPtr, size_t* pitch, size_t width, size_t height ): Allocates pitched memory on the device.
cudaError_t cudaMemGetInfo ( size_t* free, size_t* total ): Gets free and total device memory.
cudaError_t cudaMemcpy ( void* dst, const void* src, size_t count, cudaMemcpyKind kind ): Copies data between host and device.
cudaError_t cudaMemcpy2D ( void* dst, size_t dpitch, const void* src, size_t spitch, size_t width, size_t height, cudaMemcpyKind kind ): Copies data between host and device.
cudaError_t cudaMemcpy2DArrayToArray ( cudaArray_t dst, size_t wOffsetDst, size_t hOffsetDst, cudaArray_const_t src, size_t wOffsetSrc, size_t hOffsetSrc, size_t width, size_t height, cudaMemcpyKind kind = cudaMemcpyDeviceToDevice ): Copies data between host and device.
cudaError_t cudaMemcpy2DAsync ( void* dst, size_t dpitch, const void* src, size_t spitch, size_t width, size_t height, cudaMemcpyKind kind, cudaStream_t stream = 0 ): Copies data between host and device.
cudaError_t cudaMemcpy2DFromArray ( void* dst, size_t dpitch, cudaArray_const_t src, size_t wOffset, size_t hOffset, size_t width, size_t height, cudaMemcpyKind kind ): Copies data between host and device.
cudaError_t cudaMemcpy2DFromArrayAsync ( void* dst, size_t dpitch, cudaArray_const_t src, size_t wOffset, size_t hOffset, size_t width, size_t height, cudaMemcpyKind kind, cudaStream_t stream = 0 ): Copies data between host and device.
cudaError_t cudaMemcpy2DToArray ( cudaArray_t dst, size_t wOffset, size_t hOffset, const void* src, size_t spitch, size_t width, size_t height, cudaMemcpyKind kind ): Copies data between host and device.
cudaError_t cudaMemcpy2DToArrayAsync ( cudaArray_t dst, size_t wOffset, size_t hOffset, const void* src, size_t spitch, size_t width, size_t height, cudaMemcpyKind kind, cudaStream_t stream = 0 ): Copies data between host and device.
cudaError_t cudaMemcpy3D ( const cudaMemcpy3DParms* p ): Copies data between 3D objects.
cudaError_t cudaMemcpy3DAsync ( const cudaMemcpy3DParms* p, cudaStream_t stream = 0 ): Copies data between 3D objects.
cudaError_t cudaMemcpy3DPeer ( const cudaMemcpy3DPeerParms* p ): Copies memory between devices.
cudaError_t cudaMemcpy3DPeerAsync ( const cudaMemcpy3DPeerParms* p, cudaStream_t stream = 0 ): Copies memory between devices asynchronously.
cudaError_t cudaMemcpyArrayToArray ( cudaArray_t dst, size_t wOffsetDst, size_t hOffsetDst, cudaArray_const_t src, size_t wOffsetSrc, size_t hOffsetSrc, size_t count, cudaMemcpyKind kind = cudaMemcpyDeviceToDevice ): Copies data between host and device.
cudaError_t cudaMemcpyAsync ( void* dst, const void* src, size_t count, cudaMemcpyKind kind, cudaStream_t stream = 0 ): Copies data between host and device.
cudaError_t cudaMemcpyFromArray ( void* dst, cudaArray_const_t src, size_t wOffset, size_t hOffset, size_t count, cudaMemcpyKind kind ): Copies data between host and device.
cudaError_t cudaMemcpyFromArrayAsync ( void* dst, cudaArray_const_t src, size_t wOffset, size_t hOffset, size_t count, cudaMemcpyKind kind, cudaStream_t stream = 0 ): Copies data between host and device.
cudaError_t cudaMemcpyFromSymbol ( void* dst, const void* symbol, size_t count, size_t offset = 0, cudaMemcpyKind kind = cudaMemcpyDeviceToHost ): Copies data from the given symbol on the device.
cudaError_t cudaMemcpyFromSymbolAsync ( void* dst, const void* symbol, size_t count, size_t offset, cudaMemcpyKind kind, cudaStream_t stream = 0 ): Copies data from the given symbol on the device.
cudaError_t cudaMemcpyPeer ( void* dst, int dstDevice, const void* src, int srcDevice, size_t count ): Copies memory between two devices.
cudaError_t cudaMemcpyPeerAsync ( void* dst, int dstDevice, const void* src, int srcDevice, size_t count, cudaStream_t stream = 0 ): Copies memory between two devices asynchronously.
cudaError_t cudaMemcpyToArray ( cudaArray_t dst, size_t wOffset, size_t hOffset, const void* src, size_t count, cudaMemcpyKind kind ): Copies data between host and device.
cudaError_t cudaMemcpyToArrayAsync ( cudaArray_t dst, size_t wOffset, size_t hOffset, const void* src, size_t count, cudaMemcpyKind kind, cudaStream_t stream = 0 ): Copies data between host and device.
cudaError_t cudaMemcpyToSymbol ( const void* symbol, const void* src, size_t count, size_t offset = 0, cudaMemcpyKind kind = cudaMemcpyHostToDevice ): Copies data to the given symbol on the device.
cudaError_t cudaMemcpyToSymbolAsync ( const void* symbol, const void* src, size_t count, size_t offset, cudaMemcpyKind kind, cudaStream_t stream = 0 ): Copies data to the given symbol on the device.
cudaError_t cudaMemset ( void* devPtr, int value, size_t count ): Initializes or sets device memory to a value.
cudaError_t cudaMemset2D ( void* devPtr, size_t pitch, int value, size_t width, size_t height ): Initializes or sets device memory to a value.
cudaError_t cudaMemset2DAsync ( void* devPtr, size_t pitch, int value, size_t width, size_t height, cudaStream_t stream = 0 ): Initializes or sets device memory to a value.
cudaError_t cudaMemset3D ( cudaPitchedPtr pitchedDevPtr, int value, cudaExtent extent ): Initializes or sets device memory to a value.
cudaError_t cudaMemset3DAsync ( cudaPitchedPtr pitchedDevPtr, int value, cudaExtent extent, cudaStream_t stream = 0 ): Initializes or sets device memory to a value.
cudaError_t cudaMemsetAsync ( void* devPtr, int value, size_t count, cudaStream_t stream = 0 ): Initializes or sets device memory to a value.
cudaExtent make_cudaExtent ( size_t w, size_t h, size_t d ): Returns a cudaExtent based on input parameters.
cudaPitchedPtr make_cudaPitchedPtr ( void* d, size_t p, size_t xsz, size_t ysz ): Returns a cudaPitchedPtr based on input parameters.
cudaPos make_cudaPos ( size_t x, size_t y, size_t z ): Returns a cudaPos based on input parameters.

Functions

cudaError_t cudaArrayGetInfo ( cudaChannelFormatDesc* desc, cudaExtent* extent, unsigned int* flags, cudaArray_t array )

Gets info about the specified cudaArray.

Parameters

desc: - Returned array type
extent: - Returned array shape. 2D arrays will have depth of zero
flags: - Returned array flags
array: - The cudaArray to get info for

Returns

cudaSuccess, cudaErrorInvalidValue

Description

Returns in *desc, *extent and *flags respectively, the type, shape and flags of array.

Any of *desc, *extent and *flags may be specified as NULL.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

cudaError_t cudaFree ( void* devPtr )

Frees memory on the device.

Parameters

devPtr: - Device pointer to memory to free

Returns

cudaSuccess, cudaErrorInvalidDevicePointer, cudaErrorInitializationError

Description

Frees the memory space pointed to by devPtr, which must have been returned by a previous call to cudaMalloc() or cudaMallocPitch(). Otherwise, or if cudaFree(devPtr) has already been called before, an error is returned. If devPtr is 0, no operation is performed. cudaFree() returns cudaErrorInvalidDevicePointer in case of failure.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

cudaError_t cudaFreeArray ( cudaArray_t array )

Frees an array on the device.

Parameters

array: - Pointer to array to free

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInitializationError

Description

Frees the CUDA array array, which must have been * returned by a previous call to cudaMallocArray(). If cudaFreeArray(array) has already been called before, cudaErrorInvalidValue is returned. If devPtr is 0, no operation is performed.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

cudaError_t cudaFreeHost ( void* ptr )

Frees page-locked memory.

Parameters

ptr: - Pointer to memory to free

Returns

cudaSuccess, cudaErrorInitializationError

Description

Frees the memory space pointed to by hostPtr, which must have been returned by a previous call to cudaMallocHost() or cudaHostAlloc().

Note:

Note that this function may also return error codes from previous, asynchronous launches.

cudaError_t cudaFreeMipmappedArray ( cudaMipmappedArray_t mipmappedArray )

Frees a mipmapped array on the device.

Parameters

mipmappedArray: - Pointer to mipmapped array to free

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInitializationError

Description

Frees the CUDA mipmapped array mipmappedArray, which must have been returned by a previous call to cudaMallocMipmappedArray(). If cudaFreeMipmappedArray(mipmappedArray) has already been called before, cudaErrorInvalidValue is returned.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

cudaError_t cudaGetMipmappedArrayLevel ( cudaArray_t* levelArray, cudaMipmappedArray_const_t mipmappedArray, unsigned int level )

Gets a mipmap level of a CUDA mipmapped array.

Parameters

levelArray: - Returned mipmap level CUDA array
mipmappedArray: - CUDA mipmapped array
level: - Mipmap level

Returns

cudaSuccess, cudaErrorInvalidValue

Description

Returns in *levelArray a CUDA array that represents a single mipmap level of the CUDA mipmapped array mipmappedArray.

If level is greater than the maximum number of levels in this mipmapped array, cudaErrorInvalidValue is returned.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

cudaError_t cudaGetSymbolAddress ( void** devPtr, const void* symbol )

Finds the address associated with a CUDA symbol.

Parameters

devPtr: - Return device pointer associated with symbol
symbol: - Device symbol address

Returns

cudaSuccess, cudaErrorInvalidSymbol

Description

Returns in *devPtr the address of symbol symbol on the device. symbol is a variable that resides in global or constant memory space. If symbol cannot be found, or if symbol is not declared in the global or constant memory space, *devPtr is unchanged and the error cudaErrorInvalidSymbol is returned.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
Use of a string naming a variable as the symbol paramater was deprecated in CUDA 4.1 and removed in CUDA 5.0.

cudaError_t cudaGetSymbolSize ( size_t* size, const void* symbol )

Finds the size of the object associated with a CUDA symbol.

Parameters

size: - Size of object associated with symbol
symbol: - Device symbol address

Returns

cudaSuccess, cudaErrorInvalidSymbol

Description

Returns in *size the size of symbol symbol. symbol is a variable that resides in global or constant memory space. If symbol cannot be found, or if symbol is not declared in global or constant memory space, *size is unchanged and the error cudaErrorInvalidSymbol is returned.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
Use of a string naming a variable as the symbol paramater was deprecated in CUDA 4.1 and removed in CUDA 5.0.

cudaError_t cudaHostAlloc ( void** pHost, size_t size, unsigned int flags )

Allocates page-locked memory on the host.

Parameters

pHost: - Device pointer to allocated memory
size: - Requested allocation size in bytes
flags: - Requested properties of allocated memory

Returns

cudaSuccess, cudaErrorMemoryAllocation

Description

Allocates size bytes of host memory that is page-locked and accessible to the device. The driver tracks the virtual memory ranges allocated with this function and automatically accelerates calls to functions such as cudaMemcpy(). Since the memory can be accessed directly by the device, it can be read or written with much higher bandwidth than pageable memory obtained with functions such as malloc(). Allocating excessive amounts of pinned memory may degrade system performance, since it reduces the amount of memory available to the system for paging. As a result, this function is best used sparingly to allocate staging areas for data exchange between host and device.

The flags parameter enables different options to be specified that affect the allocation, as follows.

cudaHostAllocDefault: This flag's value is defined to be 0 and causes cudaHostAlloc() to emulate cudaMallocHost().
cudaHostAllocPortable: The memory returned by this call will be considered as pinned memory by all CUDA contexts, not just the one that performed the allocation.
cudaHostAllocMapped: Maps the allocation into the CUDA address space. The device pointer to the memory may be obtained by calling cudaHostGetDevicePointer().
cudaHostAllocWriteCombined: Allocates the memory as write-combined (WC). WC memory can be transferred across the PCI Express bus more quickly on some system configurations, but cannot be read efficiently by most CPUs. WC memory is a good option for buffers that will be written by the CPU and read by the device via mapped pinned memory or host->device transfers.

All of these flags are orthogonal to one another: a developer may allocate memory that is portable, mapped and/or write-combined with no restrictions.

cudaSetDeviceFlags() must have been called with the cudaDeviceMapHost flag in order for the cudaHostAllocMapped flag to have any effect.

The cudaHostAllocMapped flag may be specified on CUDA contexts for devices that do not support mapped pinned memory. The failure is deferred to cudaHostGetDevicePointer() because the memory may be mapped into other CUDA contexts via the cudaHostAllocPortable flag.

Memory allocated by this function must be freed with cudaFreeHost().

Note:

Note that this function may also return error codes from previous, asynchronous launches.

cudaError_t cudaHostGetDevicePointer ( void** pDevice, void* pHost, unsigned int flags )

Passes back device pointer of mapped host memory allocated by cudaHostAlloc or registered by cudaHostRegister.

Parameters

pDevice: - Returned device pointer for mapped memory
pHost: - Requested host pointer mapping
flags: - Flags for extensions (must be 0 for now)

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorMemoryAllocation

Description

Passes back the device pointer corresponding to the mapped, pinned host buffer allocated by cudaHostAlloc() or registered by cudaHostRegister().

cudaHostGetDevicePointer() will fail if the cudaDeviceMapHost flag was not specified before deferred context creation occurred, or if called on a device that does not support mapped, pinned memory.

flags provides for future releases. For now, it must be set to 0.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaSetDeviceFlags, cudaHostAlloc

cudaError_t cudaHostGetFlags ( unsigned int* pFlags, void* pHost )

Passes back flags used to allocate pinned host memory allocated by cudaHostAlloc.

Parameters

pFlags: - Returned flags word
pHost: - Host pointer

Returns

cudaSuccess, cudaErrorInvalidValue

Description

cudaHostGetFlags() will fail if the input pointer does not reside in an address range allocated by cudaHostAlloc().

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaHostAlloc

cudaError_t cudaHostRegister ( void* ptr, size_t size, unsigned int flags )

Registers an existing host memory range for use by CUDA.

Parameters

ptr: - Host pointer to memory to page-lock
size: - Size in bytes of the address range to page-lock in bytes
flags: - Flags for allocation request

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorMemoryAllocation

Description

Page-locks the memory range specified by ptr and size and maps it for the device(s) as specified by flags. This memory range also is added to the same tracking mechanism as cudaHostAlloc() to automatically accelerate calls to functions such as cudaMemcpy(). Since the memory can be accessed directly by the device, it can be read or written with much higher bandwidth than pageable memory that has not been registered. Page-locking excessive amounts of memory may degrade system performance, since it reduces the amount of memory available to the system for paging. As a result, this function is best used sparingly to register staging areas for data exchange between host and device.

The flags parameter enables different options to be specified that affect the allocation, as follows.

cudaHostRegisterPortable: The memory returned by this call will be considered as pinned memory by all CUDA contexts, not just the one that performed the allocation.

cudaHostRegisterMapped: Maps the allocation into the CUDA address space. The device pointer to the memory may be obtained by calling cudaHostGetDevicePointer(). This feature is available only on GPUs with compute capability greater than or equal to 1.1.

All of these flags are orthogonal to one another: a developer may page-lock memory that is portable or mapped with no restrictions.

The CUDA context must have been created with the cudaMapHost flag in order for the cudaHostRegisterMapped flag to have any effect.

The cudaHostRegisterMapped flag may be specified on CUDA contexts for devices that do not support mapped pinned memory. The failure is deferred to cudaHostGetDevicePointer() because the memory may be mapped into other CUDA contexts via the cudaHostRegisterPortable flag.

The memory page-locked by this function must be unregistered with cudaHostUnregister().

Note:

Note that this function may also return error codes from previous, asynchronous launches.

cudaError_t cudaHostUnregister ( void* ptr )

Unregisters a memory range that was registered with cudaHostRegister.

Parameters

ptr: - Host pointer to memory to unregister

Returns

cudaSuccess, cudaErrorInvalidValue

Description

Unmaps the memory range whose base address is specified by ptr, and makes it pageable again.

The base address must be the same one specified to cudaHostRegister().

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaHostUnregister

cudaError_t cudaMalloc ( void** devPtr, size_t size )

Allocate memory on the device.

Parameters

devPtr: - Pointer to allocated device memory
size: - Requested allocation size in bytes

Returns

cudaSuccess, cudaErrorMemoryAllocation

Description

Allocates size bytes of linear memory on the device and returns in *devPtr a pointer to the allocated memory. The allocated memory is suitably aligned for any kind of variable. The memory is not cleared. cudaMalloc() returns cudaErrorMemoryAllocation in case of failure.

cudaError_t cudaMalloc3D ( cudaPitchedPtr* pitchedDevPtr, cudaExtent extent )

Allocates logical 1D, 2D, or 3D memory objects on the device.

Parameters

pitchedDevPtr: - Pointer to allocated pitched device memory
extent: - Requested allocation size (width field in bytes)

Returns

cudaSuccess, cudaErrorMemoryAllocation

Description

Allocates at least width * height * depth bytes of linear memory on the device and returns a cudaPitchedPtr in which ptr is a pointer to the allocated memory. The function may pad the allocation to ensure hardware alignment requirements are met. The pitch returned in the pitch field of pitchedDevPtr is the width in bytes of the allocation.

The returned cudaPitchedPtr contains additional fields xsize and ysize, the logical width and height of the allocation, which are equivalent to the width and heightextent parameters provided by the programmer during allocation.

For allocations of 2D and 3D objects, it is highly recommended that programmers perform allocations using cudaMalloc3D() or cudaMallocPitch(). Due to alignment restrictions in the hardware, this is especially true if the application will be performing memory copies involving 2D or 3D objects (whether linear memory or CUDA arrays).

Note:

Note that this function may also return error codes from previous, asynchronous launches.

cudaError_t cudaMalloc3DArray ( cudaArray_t* array, const cudaChannelFormatDesc* desc, cudaExtent extent, unsigned int flags = 0 )

Allocate an array on the device.

Parameters

array: - Pointer to allocated array in device memory
desc: - Requested channel format
extent: - Requested allocation size (width field in elements)
flags: - Flags for extensions

Returns

cudaSuccess, cudaErrorMemoryAllocation

Description

Allocates a CUDA array according to the cudaChannelFormatDesc structure desc and returns a handle to the new CUDA array in *array.

The cudaChannelFormatDesc is defined as:

‎    struct cudaChannelFormatDesc {
              int x, y, z, w;
              enum cudaChannelFormatKind 
                  f;
          };

where cudaChannelFormatKind is one of cudaChannelFormatKindSigned, cudaChannelFormatKindUnsigned, or cudaChannelFormatKindFloat.

cudaMalloc3DArray() can allocate the following:

A 1D array is allocated if the height and depth extents are both zero.
A 2D array is allocated if only the depth extent is zero.
A 3D array is allocated if all three extents are non-zero.
A 1D layered CUDA array is allocated if only the height extent is zero and the cudaArrayLayered flag is set. Each layer is a 1D array. The number of layers is determined by the depth extent.
A 2D layered CUDA array is allocated if all three extents are non-zero and the cudaArrayLayered flag is set. Each layer is a 2D array. The number of layers is determined by the depth extent.
A cubemap CUDA array is allocated if all three extents are non-zero and the cudaArrayCubemap flag is set. Width must be equal to height, and depth must be six. A cubemap is a special type of 2D layered CUDA array, where the six layers represent the six faces of a cube. The order of the six layers in memory is the same as that listed in cudaGraphicsCubeFace.
A cubemap layered CUDA array is allocated if all three extents are non-zero, and both, cudaArrayCubemap and cudaArrayLayered flags are set. Width must be equal to height, and depth must be a multiple of six. A cubemap layered CUDA array is a special type of 2D layered CUDA array that consists of a collection of cubemaps. The first six layers represent the first cubemap, the next six layers form the second cubemap, and so on.

The flags parameter enables different options to be specified that affect the allocation, as follows.

cudaArrayDefault: This flag's value is defined to be 0 and provides default array allocation
cudaArrayLayered: Allocates a layered CUDA array, with the depth extent indicating the number of layers
cudaArrayCubemap: Allocates a cubemap CUDA array. Width must be equal to height, and depth must be six. If the cudaArrayLayered flag is also set, depth must be a multiple of six.
cudaArraySurfaceLoadStore: Allocates a CUDA array that could be read from or written to using a surface reference.
cudaArrayTextureGather: This flag indicates that texture gather operations will be performed on the CUDA array. Texture gather can only be performed on 2D CUDA arrays.

The width, height and depth extents must meet certain size requirements as listed in the following table. All values are specified in elements.

Note that 2D CUDA arrays have different size requirements if the cudaArrayTextureGather flag is set. In that case, the valid range for (width, height, depth) is ((1,maxTexture2DGather[0]), (1,maxTexture2DGather[1]), 0).

CUDA array type	Valid extents that must always be met {(width range in elements), (height range), (depth range)}	Valid extents with cudaArraySurfaceLoadStore set {(width range in elements), (height range), (depth range)}
1D	{ (1,maxTexture1D), 0, 0 }	{ (1,maxSurface1D), 0, 0 }
2D	{ (1,maxTexture2D[0]), (1,maxTexture2D[1]), 0 }	{ (1,maxSurface2D[0]), (1,maxSurface2D[1]), 0 }
3D	{ (1,maxTexture3D[0]), (1,maxTexture3D[1]), (1,maxTexture3D[2]) } OR { (1,maxTexture3DAlt[0]), (1,maxTexture3DAlt[1]), (1,maxTexture3DAlt[2]) }	{ (1,maxSurface3D[0]), (1,maxSurface3D[1]), (1,maxSurface3D[2]) }
1D Layered	{ (1,maxTexture1DLayered[0]), 0, (1,maxTexture1DLayered[1]) }	{ (1,maxSurface1DLayered[0]), 0, (1,maxSurface1DLayered[1]) }
2D Layered	{ (1,maxTexture2DLayered[0]), (1,maxTexture2DLayered[1]), (1,maxTexture2DLayered[2]) }	{ (1,maxSurface2DLayered[0]), (1,maxSurface2DLayered[1]), (1,maxSurface2DLayered[2]) }
Cubemap	{ (1,maxTextureCubemap), (1,maxTextureCubemap), 6 }	{ (1,maxSurfaceCubemap), (1,maxSurfaceCubemap), 6 }
Cubemap Layered	{ (1,maxTextureCubemapLayered[0]), (1,maxTextureCubemapLayered[0]), (1,maxTextureCubemapLayered[1]) }	{ (1,maxSurfaceCubemapLayered[0]), (1,maxSurfaceCubemapLayered[0]), (1,maxSurfaceCubemapLayered[1]) }

Note:

Note that this function may also return error codes from previous, asynchronous launches.

cudaError_t cudaMallocArray ( cudaArray_t* array, const cudaChannelFormatDesc* desc, size_t width, size_t height = 0, unsigned int flags = 0 )

Allocate an array on the device.

Parameters

array: - Pointer to allocated array in device memory
desc: - Requested channel format
width: - Requested array allocation width
height: - Requested array allocation height
flags: - Requested properties of allocated array

Returns

cudaSuccess, cudaErrorMemoryAllocation

Description

Allocates a CUDA array according to the cudaChannelFormatDesc structure desc and returns a handle to the new CUDA array in *array.

The cudaChannelFormatDesc is defined as:

‎    struct cudaChannelFormatDesc {
              int x, y, z, w;
          enum cudaChannelFormatKind 
                  f;
          };

where cudaChannelFormatKind is one of cudaChannelFormatKindSigned, cudaChannelFormatKindUnsigned, or cudaChannelFormatKindFloat.

The flags parameter enables different options to be specified that affect the allocation, as follows.

cudaArrayDefault: This flag's value is defined to be 0 and provides default array allocation
cudaArraySurfaceLoadStore: Allocates an array that can be read from or written to using a surface reference
cudaArrayTextureGather: This flag indicates that texture gather operations will be performed on the array.

width and height must meet certain size requirements. See cudaMalloc3DArray() for more details.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

cudaError_t cudaMallocHost ( void** ptr, size_t size )

Allocates page-locked memory on the host.

Parameters

ptr: - Pointer to allocated host memory
size: - Requested allocation size in bytes

Returns

cudaSuccess, cudaErrorMemoryAllocation

Description

Allocates size bytes of host memory that is page-locked and accessible to the device. The driver tracks the virtual memory ranges allocated with this function and automatically accelerates calls to functions such as cudaMemcpy*(). Since the memory can be accessed directly by the device, it can be read or written with much higher bandwidth than pageable memory obtained with functions such as malloc(). Allocating excessive amounts of memory with cudaMallocHost() may degrade system performance, since it reduces the amount of memory available to the system for paging. As a result, this function is best used sparingly to allocate staging areas for data exchange between host and device.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

cudaError_t cudaMallocManaged ( void** devPtr, size_t size, unsigned int flags )

Allocates memory that will be automatically managed by the Unified Memory system.

Parameters

devPtr: - Pointer to allocated device memory
size: - Requested allocation size in bytes
flags: - Must be either cudaMemAttachGlobal or cudaMemAttachHost

Returns

cudaSuccess, cudaErrorMemoryAllocation cudaErrorNotSupported cudaErrorInvalidValue

Description

Allocates size bytes of managed memory on the device and returns in *devPtr a pointer to the allocated memory. If the device doesn't support allocating managed memory, cudaErrorNotSupported is returned. Support for managed memory can be queried using the device attribute cudaDevAttrManagedMemory. The allocated memory is suitably aligned for any kind of variable. The memory is not cleared. If size is 0, cudaMallocManaged returns cudaErrorInvalidValue. The pointer is valid on the CPU and on all GPUs in the system that support managed memory. All accesses to this pointer must obey the Unified Memory programming model.

flags specifies the default stream association for this allocation. flags must be one of cudaMemAttachGlobal or cudaMemAttachHost. If cudaMemAttachGlobal is specified, then this memory is accessible from any stream on any device. If cudaMemAttachHost is specified, then the allocation is created with initial visibility restricted to host access only; an explicit call to cudaStreamAttachMemAsync will be required to enable access on the device.

If the association is later changed via cudaStreamAttachMemAsync to a single stream, the default association, as specifed during cudaMallocManaged, is restored when that stream is destroyed. For __managed__ variables, the default association is always cudaMemAttachGlobal. Note that destroying a stream is an asynchronous operation, and as a result, the change to default association won't happen until all work in the stream has completed.

Memory allocated with cudaMallocManaged should be released with cudaFree.

On a multi-GPU system with peer-to-peer support, where multiple GPUs support managed memory, the physical storage is created on the GPU which is active at the time cudaMallocManaged is called. All other GPUs will reference the data at reduced bandwidth via peer mappings over the PCIe bus. The Unified Memory management system does not migrate memory between GPUs.

On a multi-GPU system where multiple GPUs support managed memory, but not all pairs of such GPUs have peer-to-peer support between them, the physical storage is created in 'zero-copy' or system memory. All GPUs will reference the data at reduced bandwidth over the PCIe bus. In these circumstances, use of the environment variable, CUDA_VISIBLE_DEVICES, is recommended to restrict CUDA to only use those GPUs that have peer-to-peer support. This environment variable is described in the CUDA programming guide under the "CUDA environment variables" section.

cudaError_t cudaMallocMipmappedArray ( cudaMipmappedArray_t* mipmappedArray, const cudaChannelFormatDesc* desc, cudaExtent extent, unsigned int numLevels, unsigned int flags = 0 )

Allocate a mipmapped array on the device.

Parameters

mipmappedArray: - Pointer to allocated mipmapped array in device memory
desc: - Requested channel format
extent: - Requested allocation size (width field in elements)
numLevels: - Number of mipmap levels to allocate
flags: - Flags for extensions

Returns

cudaSuccess, cudaErrorMemoryAllocation

Description

Allocates a CUDA mipmapped array according to the cudaChannelFormatDesc structure desc and returns a handle to the new CUDA mipmapped array in *mipmappedArray. numLevels specifies the number of mipmap levels to be allocated. This value is clamped to the range [1, 1 + floor(log2(max(width, height, depth)))].

The cudaChannelFormatDesc is defined as:

‎    struct cudaChannelFormatDesc {
              int x, y, z, w;
              enum cudaChannelFormatKind 
                  f;
          };

where cudaChannelFormatKind is one of cudaChannelFormatKindSigned, cudaChannelFormatKindUnsigned, or cudaChannelFormatKindFloat.

cudaMallocMipmappedArray() can allocate the following:

A 1D mipmapped array is allocated if the height and depth extents are both zero.
A 2D mipmapped array is allocated if only the depth extent is zero.
A 3D mipmapped array is allocated if all three extents are non-zero.
A 1D layered CUDA mipmapped array is allocated if only the height extent is zero and the cudaArrayLayered flag is set. Each layer is a 1D mipmapped array. The number of layers is determined by the depth extent.
A 2D layered CUDA mipmapped array is allocated if all three extents are non-zero and the cudaArrayLayered flag is set. Each layer is a 2D mipmapped array. The number of layers is determined by the depth extent.
A cubemap CUDA mipmapped array is allocated if all three extents are non-zero and the cudaArrayCubemap flag is set. Width must be equal to height, and depth must be six. The order of the six layers in memory is the same as that listed in cudaGraphicsCubeFace.
A cubemap layered CUDA mipmapped array is allocated if all three extents are non-zero, and both, cudaArrayCubemap and cudaArrayLayered flags are set. Width must be equal to height, and depth must be a multiple of six. A cubemap layered CUDA mipmapped array is a special type of 2D layered CUDA mipmapped array that consists of a collection of cubemap mipmapped arrays. The first six layers represent the first cubemap mipmapped array, the next six layers form the second cubemap mipmapped array, and so on.

The flags parameter enables different options to be specified that affect the allocation, as follows.

cudaArrayDefault: This flag's value is defined to be 0 and provides default mipmapped array allocation
cudaArrayLayered: Allocates a layered CUDA mipmapped array, with the depth extent indicating the number of layers
cudaArrayCubemap: Allocates a cubemap CUDA mipmapped array. Width must be equal to height, and depth must be six. If the cudaArrayLayered flag is also set, depth must be a multiple of six.
cudaArraySurfaceLoadStore: This flag indicates that individual mipmap levels of the CUDA mipmapped array will be read from or written to using a surface reference.
cudaArrayTextureGather: This flag indicates that texture gather operations will be performed on the CUDA array. Texture gather can only be performed on 2D CUDA mipmapped arrays, and the gather operations are performed only on the most detailed mipmap level.

The width, height and depth extents must meet certain size requirements as listed in the following table. All values are specified in elements.

CUDA array type	Valid extents {(width range in elements), (height range), (depth range)}
1D	{ (1,maxTexture1DMipmap), 0, 0 }
2D	{ (1,maxTexture2DMipmap[0]), (1,maxTexture2DMipmap[1]), 0 }
3D	{ (1,maxTexture3D[0]), (1,maxTexture3D[1]), (1,maxTexture3D[2]) }
1D Layered	{ (1,maxTexture1DLayered[0]), 0, (1,maxTexture1DLayered[1]) }
2D Layered	{ (1,maxTexture2DLayered[0]), (1,maxTexture2DLayered[1]), (1,maxTexture2DLayered[2]) }
Cubemap	{ (1,maxTextureCubemap), (1,maxTextureCubemap), 6 }
Cubemap Layered	{ (1,maxTextureCubemapLayered[0]), (1,maxTextureCubemapLayered[0]), (1,maxTextureCubemapLayered[1]) }

Note:

Note that this function may also return error codes from previous, asynchronous launches.

cudaError_t cudaMallocPitch ( void** devPtr, size_t* pitch, size_t width, size_t height )

Allocates pitched memory on the device.

Parameters

devPtr: - Pointer to allocated pitched device memory
pitch: - Pitch for allocation
width: - Requested pitched allocation width (in bytes)
height: - Requested pitched allocation height

Returns

cudaSuccess, cudaErrorMemoryAllocation

Description

Allocates at least width (in bytes) * height bytes of linear memory on the device and returns in *devPtr a pointer to the allocated memory. The function may pad the allocation to ensure that corresponding pointers in any given row will continue to meet the alignment requirements for coalescing as the address is updated from row to row. The pitch returned in *pitch by cudaMallocPitch() is the width in bytes of the allocation. The intended usage of pitch is as a separate parameter of the allocation, used to compute addresses within the 2D array. Given the row and column of an array element of type T, the address is computed as:

‎    T* pElement = (T*)((char*)BaseAddress + Row * pitch) + Column;

For allocations of 2D arrays, it is recommended that programmers consider performing pitch allocations using cudaMallocPitch(). Due to pitch alignment restrictions in the hardware, this is especially true if the application will be performing 2D memory copies between different regions of device memory (whether linear memory or CUDA arrays).

Note:

Note that this function may also return error codes from previous, asynchronous launches.

cudaError_t cudaMemGetInfo ( size_t* free, size_t* total )

Gets free and total device memory.

Parameters

free: - Returned free memory in bytes
total: - Returned total memory in bytes

Returns

cudaSuccess, cudaErrorInitializationError, cudaErrorInvalidValue, cudaErrorLaunchFailure

Description

Returns in *free and *total respectively, the free and total amount of memory available for allocation by the device in bytes.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

cudaError_t cudaMemcpy ( void* dst, const void* src, size_t count, cudaMemcpyKind kind )

Copies data between host and device.

Parameters

dst: - Destination memory address
src: - Source memory address
count: - Size in bytes to copy
kind: - Type of transfer

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidDevicePointer, cudaErrorInvalidMemcpyDirection

Description

Copies count bytes from the memory area pointed to by src to the memory area pointed to by dst, where kind is one of cudaMemcpyHostToHost, cudaMemcpyHostToDevice, cudaMemcpyDeviceToHost, or cudaMemcpyDeviceToDevice, and specifies the direction of the copy. The memory areas may not overlap. Calling cudaMemcpy() with dst and src pointers that do not match the direction of the copy results in an undefined behavior.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
This function exhibits synchronous behavior for most use cases.

cudaError_t cudaMemcpy2D ( void* dst, size_t dpitch, const void* src, size_t spitch, size_t width, size_t height, cudaMemcpyKind kind )

Copies data between host and device.

Parameters

dst: - Destination memory address
dpitch: - Pitch of destination memory
src: - Source memory address
spitch: - Pitch of source memory
width: - Width of matrix transfer (columns in bytes)
height: - Height of matrix transfer (rows)
kind: - Type of transfer

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidPitchValue, cudaErrorInvalidDevicePointer, cudaErrorInvalidMemcpyDirection

Description

Copies a matrix (height rows of width bytes each) from the memory area pointed to by src to the memory area pointed to by dst, where kind is one of cudaMemcpyHostToHost, cudaMemcpyHostToDevice, cudaMemcpyDeviceToHost, or cudaMemcpyDeviceToDevice, and specifies the direction of the copy. dpitch and spitch are the widths in memory in bytes of the 2D arrays pointed to by dst and src, including any padding added to the end of each row. The memory areas may not overlap. width must not exceed either dpitch or spitch. Calling cudaMemcpy2D() with dst and src pointers that do not match the direction of the copy results in an undefined behavior. cudaMemcpy2D() returns an error if dpitch or spitch exceeds the maximum allowed.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

cudaError_t cudaMemcpy2DArrayToArray ( cudaArray_t dst, size_t wOffsetDst, size_t hOffsetDst, cudaArray_const_t src, size_t wOffsetSrc, size_t hOffsetSrc, size_t width, size_t height, cudaMemcpyKind kind = cudaMemcpyDeviceToDevice )

Copies data between host and device.

Parameters

dst: - Destination memory address
wOffsetDst: - Destination starting X offset
hOffsetDst: - Destination starting Y offset
src: - Source memory address
wOffsetSrc: - Source starting X offset
hOffsetSrc: - Source starting Y offset
width: - Width of matrix transfer (columns in bytes)
height: - Height of matrix transfer (rows)
kind: - Type of transfer

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidMemcpyDirection

Description

Copies a matrix (height rows of width bytes each) from the CUDA array srcArray starting at the upper left corner (wOffsetSrc, hOffsetSrc) to the CUDA array dst starting at the upper left corner (wOffsetDst, hOffsetDst), where kind is one of cudaMemcpyHostToHost, cudaMemcpyHostToDevice, cudaMemcpyDeviceToHost, or cudaMemcpyDeviceToDevice, and specifies the direction of the copy. wOffsetDst + width must not exceed the width of the CUDA array dst. wOffsetSrc + width must not exceed the width of the CUDA array src.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
This function exhibits synchronous behavior for most use cases.

cudaError_t cudaMemcpy2DAsync ( void* dst, size_t dpitch, const void* src, size_t spitch, size_t width, size_t height, cudaMemcpyKind kind, cudaStream_t stream = 0 )

Copies data between host and device.

Parameters

dst: - Destination memory address
dpitch: - Pitch of destination memory
src: - Source memory address
spitch: - Pitch of source memory
width: - Width of matrix transfer (columns in bytes)
height: - Height of matrix transfer (rows)
kind: - Type of transfer
stream: - Stream identifier

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidPitchValue, cudaErrorInvalidDevicePointer, cudaErrorInvalidMemcpyDirection

Description

Copies a matrix (height rows of width bytes each) from the memory area pointed to by src to the memory area pointed to by dst, where kind is one of cudaMemcpyHostToHost, cudaMemcpyHostToDevice, cudaMemcpyDeviceToHost, or cudaMemcpyDeviceToDevice, and specifies the direction of the copy. dpitch and spitch are the widths in memory in bytes of the 2D arrays pointed to by dst and src, including any padding added to the end of each row. The memory areas may not overlap. width must not exceed either dpitch or spitch. Calling cudaMemcpy2DAsync() with dst and src pointers that do not match the direction of the copy results in an undefined behavior. cudaMemcpy2DAsync() returns an error if dpitch or spitch is greater than the maximum allowed.

cudaMemcpy2DAsync() is asynchronous with respect to the host, so the call may return before the copy is complete. The copy can optionally be associated to a stream by passing a non-zero stream argument. If kind is cudaMemcpyHostToDevice or cudaMemcpyDeviceToHost and stream is non-zero, the copy may overlap with operations in other streams.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
This function exhibits asynchronous behavior for most use cases.
This function uses standard NULL stream semantics.

cudaError_t cudaMemcpy2DFromArray ( void* dst, size_t dpitch, cudaArray_const_t src, size_t wOffset, size_t hOffset, size_t width, size_t height, cudaMemcpyKind kind )

Copies data between host and device.

Parameters

dst: - Destination memory address
dpitch: - Pitch of destination memory
src: - Source memory address
wOffset: - Source starting X offset
hOffset: - Source starting Y offset
width: - Width of matrix transfer (columns in bytes)
height: - Height of matrix transfer (rows)
kind: - Type of transfer

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidDevicePointer, cudaErrorInvalidPitchValue, cudaErrorInvalidMemcpyDirection

Description

Copies a matrix (height rows of width bytes each) from the CUDA array srcArray starting at the upper left corner (wOffset, hOffset) to the memory area pointed to by dst, where kind is one of cudaMemcpyHostToHost, cudaMemcpyHostToDevice, cudaMemcpyDeviceToHost, or cudaMemcpyDeviceToDevice, and specifies the direction of the copy. dpitch is the width in memory in bytes of the 2D array pointed to by dst, including any padding added to the end of each row. wOffset + width must not exceed the width of the CUDA array src. width must not exceed dpitch. cudaMemcpy2DFromArray() returns an error if dpitch exceeds the maximum allowed.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
This function exhibits synchronous behavior for most use cases.

cudaError_t cudaMemcpy2DFromArrayAsync ( void* dst, size_t dpitch, cudaArray_const_t src, size_t wOffset, size_t hOffset, size_t width, size_t height, cudaMemcpyKind kind, cudaStream_t stream = 0 )

Copies data between host and device.

Parameters

dst: - Destination memory address
dpitch: - Pitch of destination memory
src: - Source memory address
wOffset: - Source starting X offset
hOffset: - Source starting Y offset
width: - Width of matrix transfer (columns in bytes)
height: - Height of matrix transfer (rows)
kind: - Type of transfer
stream: - Stream identifier

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidDevicePointer, cudaErrorInvalidPitchValue, cudaErrorInvalidMemcpyDirection

Description

Copies a matrix (height rows of width bytes each) from the CUDA array srcArray starting at the upper left corner (wOffset, hOffset) to the memory area pointed to by dst, where kind is one of cudaMemcpyHostToHost, cudaMemcpyHostToDevice, cudaMemcpyDeviceToHost, or cudaMemcpyDeviceToDevice, and specifies the direction of the copy. dpitch is the width in memory in bytes of the 2D array pointed to by dst, including any padding added to the end of each row. wOffset + width must not exceed the width of the CUDA array src. width must not exceed dpitch. cudaMemcpy2DFromArrayAsync() returns an error if dpitch exceeds the maximum allowed.

cudaMemcpy2DFromArrayAsync() is asynchronous with respect to the host, so the call may return before the copy is complete. The copy can optionally be associated to a stream by passing a non-zero stream argument. If kind is cudaMemcpyHostToDevice or cudaMemcpyDeviceToHost and stream is non-zero, the copy may overlap with operations in other streams.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
This function exhibits asynchronous behavior for most use cases.
This function uses standard NULL stream semantics.

cudaError_t cudaMemcpy2DToArray ( cudaArray_t dst, size_t wOffset, size_t hOffset, const void* src, size_t spitch, size_t width, size_t height, cudaMemcpyKind kind )

Copies data between host and device.

Parameters

dst: - Destination memory address
wOffset: - Destination starting X offset
hOffset: - Destination starting Y offset
src: - Source memory address
spitch: - Pitch of source memory
width: - Width of matrix transfer (columns in bytes)
height: - Height of matrix transfer (rows)
kind: - Type of transfer

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidDevicePointer, cudaErrorInvalidPitchValue, cudaErrorInvalidMemcpyDirection

Description

Copies a matrix (height rows of width bytes each) from the memory area pointed to by src to the CUDA array dst starting at the upper left corner (wOffset, hOffset) where kind is one of cudaMemcpyHostToHost, cudaMemcpyHostToDevice, cudaMemcpyDeviceToHost, or cudaMemcpyDeviceToDevice, and specifies the direction of the copy. spitch is the width in memory in bytes of the 2D array pointed to by src, including any padding added to the end of each row. wOffset + width must not exceed the width of the CUDA array dst. width must not exceed spitch. cudaMemcpy2DToArray() returns an error if spitch exceeds the maximum allowed.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
This function exhibits synchronous behavior for most use cases.

cudaError_t cudaMemcpy2DToArrayAsync ( cudaArray_t dst, size_t wOffset, size_t hOffset, const void* src, size_t spitch, size_t width, size_t height, cudaMemcpyKind kind, cudaStream_t stream = 0 )

Copies data between host and device.

Parameters

dst: - Destination memory address
wOffset: - Destination starting X offset
hOffset: - Destination starting Y offset
src: - Source memory address
spitch: - Pitch of source memory
width: - Width of matrix transfer (columns in bytes)
height: - Height of matrix transfer (rows)
kind: - Type of transfer
stream: - Stream identifier

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidDevicePointer, cudaErrorInvalidPitchValue, cudaErrorInvalidMemcpyDirection

Description

Copies a matrix (height rows of width bytes each) from the memory area pointed to by src to the CUDA array dst starting at the upper left corner (wOffset, hOffset) where kind is one of cudaMemcpyHostToHost, cudaMemcpyHostToDevice, cudaMemcpyDeviceToHost, or cudaMemcpyDeviceToDevice, and specifies the direction of the copy. spitch is the width in memory in bytes of the 2D array pointed to by src, including any padding added to the end of each row. wOffset + width must not exceed the width of the CUDA array dst. width must not exceed spitch. cudaMemcpy2DToArrayAsync() returns an error if spitch exceeds the maximum allowed.

cudaMemcpy2DToArrayAsync() is asynchronous with respect to the host, so the call may return before the copy is complete. The copy can optionally be associated to a stream by passing a non-zero stream argument. If kind is cudaMemcpyHostToDevice or cudaMemcpyDeviceToHost and stream is non-zero, the copy may overlap with operations in other streams.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
This function exhibits asynchronous behavior for most use cases.
This function uses standard NULL stream semantics.

cudaError_t cudaMemcpy3D ( const cudaMemcpy3DParms* p )

Copies data between 3D objects.

Parameters

p: - 3D memory copy parameters

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidDevicePointer, cudaErrorInvalidPitchValue, cudaErrorInvalidMemcpyDirection

Description

‎struct cudaExtent {
        size_t width;
        size_t height;
        size_t depth;
      };
      struct cudaExtent 
                  make_cudaExtent(size_t w, size_t h, size_t d);
      
      struct cudaPos {
        size_t x;
        size_t y;
        size_t z;
      };
      struct cudaPos 
                  make_cudaPos(size_t x, size_t y, size_t z);
      
      struct cudaMemcpy3DParms {
        cudaArray_t           
                  srcArray;
        struct cudaPos        
                  srcPos;
        struct cudaPitchedPtr 
                  srcPtr;
        cudaArray_t           
                  dstArray;
        struct cudaPos        
                  dstPos;
        struct cudaPitchedPtr 
                  dstPtr;
        struct cudaExtent     
                  extent;
        enum cudaMemcpyKind   
                  kind;
      };

cudaMemcpy3D() copies data betwen two 3D objects. The source and destination objects may be in either host memory, device memory, or a CUDA array. The source, destination, extent, and kind of copy performed is specified by the cudaMemcpy3DParms struct which should be initialized to zero before use:

‎cudaMemcpy3DParms myParms = {0};

The struct passed to cudaMemcpy3D() must specify one of srcArray or srcPtr and one of dstArray or dstPtr. Passing more than one non-zero source or destination will cause cudaMemcpy3D() to return an error.

The srcPos and dstPos fields are optional offsets into the source and destination objects and are defined in units of each object's elements. The element for a host or device pointer is assumed to be unsigned char. For CUDA arrays, positions must be in the range [0, 2048) for any dimension.

The extent field defines the dimensions of the transferred area in elements. If a CUDA array is participating in the copy, the extent is defined in terms of that array's elements. If no CUDA array is participating in the copy then the extents are defined in elements of unsigned char.

The kind field defines the direction of the copy. It must be one of cudaMemcpyHostToHost, cudaMemcpyHostToDevice, cudaMemcpyDeviceToHost, or cudaMemcpyDeviceToDevice.

If the source and destination are both arrays, cudaMemcpy3D() will return an error if they do not have the same element size.

The source and destination object may not overlap. If overlapping source and destination objects are specified, undefined behavior will result.

The source object must lie entirely within the region defined by srcPos and extent. The destination object must lie entirely within the region defined by dstPos and extent.

cudaMemcpy3D() returns an error if the pitch of srcPtr or dstPtr exceeds the maximum allowed. The pitch of a cudaPitchedPtr allocated with cudaMalloc3D() will always be valid.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
This function exhibits synchronous behavior for most use cases.

cudaError_t cudaMemcpy3DAsync ( const cudaMemcpy3DParms* p, cudaStream_t stream = 0 )

Copies data between 3D objects.

Parameters

p: - 3D memory copy parameters
stream: - Stream identifier

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidDevicePointer, cudaErrorInvalidPitchValue, cudaErrorInvalidMemcpyDirection

Description

‎struct cudaExtent {
        size_t width;
        size_t height;
        size_t depth;
      };
      struct cudaExtent 
                  make_cudaExtent(size_t w, size_t h, size_t d);
      
      struct cudaPos {
        size_t x;
        size_t y;
        size_t z;
      };
      struct cudaPos 
                  make_cudaPos(size_t x, size_t y, size_t z);
      
      struct cudaMemcpy3DParms {
        cudaArray_t           
                  srcArray;
        struct cudaPos        
                  srcPos;
        struct cudaPitchedPtr 
                  srcPtr;
        cudaArray_t           
                  dstArray;
        struct cudaPos        
                  dstPos;
        struct cudaPitchedPtr 
                  dstPtr;
        struct cudaExtent     
                  extent;
        enum cudaMemcpyKind   
                  kind;
      };

cudaMemcpy3DAsync() copies data betwen two 3D objects. The source and destination objects may be in either host memory, device memory, or a CUDA array. The source, destination, extent, and kind of copy performed is specified by the cudaMemcpy3DParms struct which should be initialized to zero before use:

‎cudaMemcpy3DParms myParms = {0};

The struct passed to cudaMemcpy3DAsync() must specify one of srcArray or srcPtr and one of dstArray or dstPtr. Passing more than one non-zero source or destination will cause cudaMemcpy3DAsync() to return an error.

The kind field defines the direction of the copy. It must be one of cudaMemcpyHostToHost, cudaMemcpyHostToDevice, cudaMemcpyDeviceToHost, or cudaMemcpyDeviceToDevice.

If the source and destination are both arrays, cudaMemcpy3DAsync() will return an error if they do not have the same element size.

The source and destination object may not overlap. If overlapping source and destination objects are specified, undefined behavior will result.

The source object must lie entirely within the region defined by srcPos and extent. The destination object must lie entirely within the region defined by dstPos and extent.

cudaMemcpy3DAsync() returns an error if the pitch of srcPtr or dstPtr exceeds the maximum allowed. The pitch of a cudaPitchedPtr allocated with cudaMalloc3D() will always be valid.

cudaMemcpy3DAsync() is asynchronous with respect to the host, so the call may return before the copy is complete. The copy can optionally be associated to a stream by passing a non-zero stream argument. If kind is cudaMemcpyHostToDevice or cudaMemcpyDeviceToHost and stream is non-zero, the copy may overlap with operations in other streams.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
This function exhibits asynchronous behavior for most use cases.
This function uses standard NULL stream semantics.

cudaError_t cudaMemcpy3DPeer ( const cudaMemcpy3DPeerParms* p )

Copies memory between devices.

Parameters

p: - Parameters for the memory copy

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidDevice

Description

Perform a 3D memory copy according to the parameters specified in p. See the definition of the cudaMemcpy3DPeerParms structure for documentation of its parameters.

Note that this function is synchronous with respect to the host only if the source or destination of the transfer is host memory. Note also that this copy is serialized with respect to all pending and future asynchronous work in to the current device, the copy's source device, and the copy's destination device (use cudaMemcpy3DPeerAsync to avoid this synchronization).

Note:

Note that this function may also return error codes from previous, asynchronous launches.
This function exhibits synchronous behavior for most use cases.

cudaError_t cudaMemcpy3DPeerAsync ( const cudaMemcpy3DPeerParms* p, cudaStream_t stream = 0 )

Copies memory between devices asynchronously.

Parameters

p: - Parameters for the memory copy
stream: - Stream identifier

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidDevice

Description

Perform a 3D memory copy according to the parameters specified in p. See the definition of the cudaMemcpy3DPeerParms structure for documentation of its parameters.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
This function exhibits asynchronous behavior for most use cases.
This function uses standard NULL stream semantics.

cudaError_t cudaMemcpyArrayToArray ( cudaArray_t dst, size_t wOffsetDst, size_t hOffsetDst, cudaArray_const_t src, size_t wOffsetSrc, size_t hOffsetSrc, size_t count, cudaMemcpyKind kind = cudaMemcpyDeviceToDevice )

Copies data between host and device.

Parameters

dst: - Destination memory address
wOffsetDst: - Destination starting X offset
hOffsetDst: - Destination starting Y offset
src: - Source memory address
wOffsetSrc: - Source starting X offset
hOffsetSrc: - Source starting Y offset
count: - Size in bytes to copy
kind: - Type of transfer

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidMemcpyDirection

Description

Copies count bytes from the CUDA array src starting at the upper left corner (wOffsetSrc, hOffsetSrc) to the CUDA array dst starting at the upper left corner (wOffsetDst, hOffsetDst) where kind is one of cudaMemcpyHostToHost, cudaMemcpyHostToDevice, cudaMemcpyDeviceToHost, or cudaMemcpyDeviceToDevice, and specifies the direction of the copy.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

cudaError_t cudaMemcpyAsync ( void* dst, const void* src, size_t count, cudaMemcpyKind kind, cudaStream_t stream = 0 )

Copies data between host and device.

Parameters

dst: - Destination memory address
src: - Source memory address
count: - Size in bytes to copy
kind: - Type of transfer
stream: - Stream identifier

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidDevicePointer, cudaErrorInvalidMemcpyDirection

Description

Copies count bytes from the memory area pointed to by src to the memory area pointed to by dst, where kind is one of cudaMemcpyHostToHost, cudaMemcpyHostToDevice, cudaMemcpyDeviceToHost, or cudaMemcpyDeviceToDevice, and specifies the direction of the copy. The memory areas may not overlap. Calling cudaMemcpyAsync() with dst and src pointers that do not match the direction of the copy results in an undefined behavior.

cudaMemcpyAsync() is asynchronous with respect to the host, so the call may return before the copy is complete. The copy can optionally be associated to a stream by passing a non-zero stream argument. If kind is cudaMemcpyHostToDevice or cudaMemcpyDeviceToHost and the stream is non-zero, the copy may overlap with operations in other streams.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
This function exhibits asynchronous behavior for most use cases.
This function uses standard NULL stream semantics.

cudaError_t cudaMemcpyFromArray ( void* dst, cudaArray_const_t src, size_t wOffset, size_t hOffset, size_t count, cudaMemcpyKind kind )

Copies data between host and device.

Parameters

dst: - Destination memory address
src: - Source memory address
wOffset: - Source starting X offset
hOffset: - Source starting Y offset
count: - Size in bytes to copy
kind: - Type of transfer

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidDevicePointer, cudaErrorInvalidMemcpyDirection

Description

Copies count bytes from the CUDA array src starting at the upper left corner (wOffset, hOffset) to the memory area pointed to by dst, where kind is one of cudaMemcpyHostToHost, cudaMemcpyHostToDevice, cudaMemcpyDeviceToHost, or cudaMemcpyDeviceToDevice, and specifies the direction of the copy.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
This function exhibits synchronous behavior for most use cases.

cudaError_t cudaMemcpyFromArrayAsync ( void* dst, cudaArray_const_t src, size_t wOffset, size_t hOffset, size_t count, cudaMemcpyKind kind, cudaStream_t stream = 0 )

Copies data between host and device.

Parameters

dst: - Destination memory address
src: - Source memory address
wOffset: - Source starting X offset
hOffset: - Source starting Y offset
count: - Size in bytes to copy
kind: - Type of transfer
stream: - Stream identifier

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidDevicePointer, cudaErrorInvalidMemcpyDirection

Description

cudaMemcpyFromArrayAsync() is asynchronous with respect to the host, so the call may return before the copy is complete. The copy can optionally be associated to a stream by passing a non-zero stream argument. If kind is cudaMemcpyHostToDevice or cudaMemcpyDeviceToHost and stream is non-zero, the copy may overlap with operations in other streams.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
This function exhibits asynchronous behavior for most use cases.
This function uses standard NULL stream semantics.

cudaError_t cudaMemcpyFromSymbol ( void* dst, const void* symbol, size_t count, size_t offset = 0, cudaMemcpyKind kind = cudaMemcpyDeviceToHost )

Copies data from the given symbol on the device.

Parameters

dst: - Destination memory address
symbol: - Device symbol address
count: - Size in bytes to copy
offset: - Offset from start of symbol in bytes
kind: - Type of transfer

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidSymbol, cudaErrorInvalidDevicePointer, cudaErrorInvalidMemcpyDirection

Description

Copies count bytes from the memory area pointed to by offset bytes from the start of symbol symbol to the memory area pointed to by dst. The memory areas may not overlap. symbol is a variable that resides in global or constant memory space. kind can be either cudaMemcpyDeviceToHost or cudaMemcpyDeviceToDevice.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
This function exhibits synchronous behavior for most use cases.
Use of a string naming a variable as the symbol paramater was deprecated in CUDA 4.1 and removed in CUDA 5.0.

cudaError_t cudaMemcpyFromSymbolAsync ( void* dst, const void* symbol, size_t count, size_t offset, cudaMemcpyKind kind, cudaStream_t stream = 0 )

Copies data from the given symbol on the device.

Parameters

dst: - Destination memory address
symbol: - Device symbol address
count: - Size in bytes to copy
offset: - Offset from start of symbol in bytes
kind: - Type of transfer
stream: - Stream identifier

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidSymbol, cudaErrorInvalidDevicePointer, cudaErrorInvalidMemcpyDirection

Description

cudaMemcpyFromSymbolAsync() is asynchronous with respect to the host, so the call may return before the copy is complete. The copy can optionally be associated to a stream by passing a non-zero stream argument. If kind is cudaMemcpyDeviceToHost and stream is non-zero, the copy may overlap with operations in other streams.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
This function exhibits asynchronous behavior for most use cases.
This function uses standard NULL stream semantics.
Use of a string naming a variable as the symbol paramater was deprecated in CUDA 4.1 and removed in CUDA 5.0.

cudaError_t cudaMemcpyPeer ( void* dst, int dstDevice, const void* src, int srcDevice, size_t count )

Copies memory between two devices.

Parameters

dst: - Destination device pointer
dstDevice: - Destination device
src: - Source device pointer
srcDevice: - Source device
count: - Size of memory copy in bytes

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidDevice

Description

Copies memory from one device to memory on another device. dst is the base device pointer of the destination memory and dstDevice is the destination device. src is the base device pointer of the source memory and srcDevice is the source device. count specifies the number of bytes to copy.

Note that this function is asynchronous with respect to the host, but serialized with respect all pending and future asynchronous work in to the current device, srcDevice, and dstDevice (use cudaMemcpyPeerAsync to avoid this synchronization).

Note:

Note that this function may also return error codes from previous, asynchronous launches.
This function exhibits synchronous behavior for most use cases.

cudaError_t cudaMemcpyPeerAsync ( void* dst, int dstDevice, const void* src, int srcDevice, size_t count, cudaStream_t stream = 0 )

Copies memory between two devices asynchronously.

Parameters

dst: - Destination device pointer
dstDevice: - Destination device
src: - Source device pointer
srcDevice: - Source device
count: - Size of memory copy in bytes
stream: - Stream identifier

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidDevice

Description

Note that this function is asynchronous with respect to the host and all work on other devices.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
This function exhibits asynchronous behavior for most use cases.
This function uses standard NULL stream semantics.

cudaError_t cudaMemcpyToArray ( cudaArray_t dst, size_t wOffset, size_t hOffset, const void* src, size_t count, cudaMemcpyKind kind )

Copies data between host and device.

Parameters

dst: - Destination memory address
wOffset: - Destination starting X offset
hOffset: - Destination starting Y offset
src: - Source memory address
count: - Size in bytes to copy
kind: - Type of transfer

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidDevicePointer, cudaErrorInvalidMemcpyDirection

Description

Copies count bytes from the memory area pointed to by src to the CUDA array dst starting at the upper left corner (wOffset, hOffset), where kind is one of cudaMemcpyHostToHost, cudaMemcpyHostToDevice, cudaMemcpyDeviceToHost, or cudaMemcpyDeviceToDevice, and specifies the direction of the copy.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
This function exhibits synchronous behavior for most use cases.

cudaError_t cudaMemcpyToArrayAsync ( cudaArray_t dst, size_t wOffset, size_t hOffset, const void* src, size_t count, cudaMemcpyKind kind, cudaStream_t stream = 0 )

Copies data between host and device.

Parameters

dst: - Destination memory address
wOffset: - Destination starting X offset
hOffset: - Destination starting Y offset
src: - Source memory address
count: - Size in bytes to copy
kind: - Type of transfer
stream: - Stream identifier

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidDevicePointer, cudaErrorInvalidMemcpyDirection

Description

cudaMemcpyToArrayAsync() is asynchronous with respect to the host, so the call may return before the copy is complete. The copy can optionally be associated to a stream by passing a non-zero stream argument. If kind is cudaMemcpyHostToDevice or cudaMemcpyDeviceToHost and stream is non-zero, the copy may overlap with operations in other streams.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
This function exhibits asynchronous behavior for most use cases.
This function uses standard NULL stream semantics.

cudaError_t cudaMemcpyToSymbol ( const void* symbol, const void* src, size_t count, size_t offset = 0, cudaMemcpyKind kind = cudaMemcpyHostToDevice )

Copies data to the given symbol on the device.

Parameters

symbol: - Device symbol address
src: - Source memory address
count: - Size in bytes to copy
offset: - Offset from start of symbol in bytes
kind: - Type of transfer

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidSymbol, cudaErrorInvalidDevicePointer, cudaErrorInvalidMemcpyDirection

Description

Copies count bytes from the memory area pointed to by src to the memory area pointed to by offset bytes from the start of symbol symbol. The memory areas may not overlap. symbol is a variable that resides in global or constant memory space. kind can be either cudaMemcpyHostToDevice or cudaMemcpyDeviceToDevice.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
This function exhibits synchronous behavior for most use cases.
Use of a string naming a variable as the symbol paramater was deprecated in CUDA 4.1 and removed in CUDA 5.0.

cudaError_t cudaMemcpyToSymbolAsync ( const void* symbol, const void* src, size_t count, size_t offset, cudaMemcpyKind kind, cudaStream_t stream = 0 )

Copies data to the given symbol on the device.

Parameters

symbol: - Device symbol address
src: - Source memory address
count: - Size in bytes to copy
offset: - Offset from start of symbol in bytes
kind: - Type of transfer
stream: - Stream identifier

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidSymbol, cudaErrorInvalidDevicePointer, cudaErrorInvalidMemcpyDirection

Description

cudaMemcpyToSymbolAsync() is asynchronous with respect to the host, so the call may return before the copy is complete. The copy can optionally be associated to a stream by passing a non-zero stream argument. If kind is cudaMemcpyHostToDevice and stream is non-zero, the copy may overlap with operations in other streams.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
This function exhibits asynchronous behavior for most use cases.
This function uses standard NULL stream semantics.
Use of a string naming a variable as the symbol paramater was deprecated in CUDA 4.1 and removed in CUDA 5.0.

cudaError_t cudaMemset ( void* devPtr, int value, size_t count )

Initializes or sets device memory to a value.

Parameters

devPtr: - Pointer to device memory
value: - Value to set for each byte of specified memory
count: - Size in bytes to set

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidDevicePointer

Description

Fills the first count bytes of the memory area pointed to by devPtr with the constant byte value value.

Note that this function is asynchronous with respect to the host unless devPtr refers to pinned host memory.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
See also memset synchronization details.

cudaError_t cudaMemset2D ( void* devPtr, size_t pitch, int value, size_t width, size_t height )

Initializes or sets device memory to a value.

Parameters

devPtr: - Pointer to 2D device memory
pitch: - Pitch in bytes of 2D device memory
value: - Value to set for each byte of specified memory
width: - Width of matrix set (columns in bytes)
height: - Height of matrix set (rows)

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidDevicePointer

Description

Sets to the specified value value a matrix (height rows of width bytes each) pointed to by dstPtr. pitch is the width in bytes of the 2D array pointed to by dstPtr, including any padding added to the end of each row. This function performs fastest when the pitch is one that has been passed back by cudaMallocPitch().

Note that this function is asynchronous with respect to the host unless devPtr refers to pinned host memory.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
See also memset synchronization details.

cudaError_t cudaMemset2DAsync ( void* devPtr, size_t pitch, int value, size_t width, size_t height, cudaStream_t stream = 0 )

Initializes or sets device memory to a value.

Parameters

devPtr: - Pointer to 2D device memory
pitch: - Pitch in bytes of 2D device memory
value: - Value to set for each byte of specified memory
width: - Width of matrix set (columns in bytes)
height: - Height of matrix set (rows)
stream: - Stream identifier

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidDevicePointer

Description

cudaMemset2DAsync() is asynchronous with respect to the host, so the call may return before the memset is complete. The operation can optionally be associated to a stream by passing a non-zero stream argument. If stream is non-zero, the operation may overlap with operations in other streams.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
See also memset synchronization details.
This function uses standard NULL stream semantics.

cudaError_t cudaMemset3D ( cudaPitchedPtr pitchedDevPtr, int value, cudaExtent extent )

Initializes or sets device memory to a value.

Parameters

pitchedDevPtr: - Pointer to pitched device memory
value: - Value to set for each byte of specified memory
extent: - Size parameters for where to set device memory (width field in bytes)

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidDevicePointer

Description

Initializes each element of a 3D array to the specified value value. The object to initialize is defined by pitchedDevPtr. The pitch field of pitchedDevPtr is the width in memory in bytes of the 3D array pointed to by pitchedDevPtr, including any padding added to the end of each row. The xsize field specifies the logical width of each row in bytes, while the ysize field specifies the height of each 2D slice in rows.

The extents of the initialized region are specified as a width in bytes, a height in rows, and a depth in slices.

Extents with width greater than or equal to the xsize of pitchedDevPtr may perform significantly faster than extents narrower than the xsize. Secondarily, extents with height equal to the ysize of pitchedDevPtr will perform faster than when the height is shorter than the ysize.

This function performs fastest when the pitchedDevPtr has been allocated by cudaMalloc3D().

Note that this function is asynchronous with respect to the host unless pitchedDevPtr refers to pinned host memory.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
See also memset synchronization details.

cudaError_t cudaMemset3DAsync ( cudaPitchedPtr pitchedDevPtr, int value, cudaExtent extent, cudaStream_t stream = 0 )

Initializes or sets device memory to a value.

Parameters

pitchedDevPtr: - Pointer to pitched device memory
value: - Value to set for each byte of specified memory
extent: - Size parameters for where to set device memory (width field in bytes)
stream: - Stream identifier

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidDevicePointer

Description

The extents of the initialized region are specified as a width in bytes, a height in rows, and a depth in slices.

This function performs fastest when the pitchedDevPtr has been allocated by cudaMalloc3D().

cudaMemset3DAsync() is asynchronous with respect to the host, so the call may return before the memset is complete. The operation can optionally be associated to a stream by passing a non-zero stream argument. If stream is non-zero, the operation may overlap with operations in other streams.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
See also memset synchronization details.
This function uses standard NULL stream semantics.

cudaError_t cudaMemsetAsync ( void* devPtr, int value, size_t count, cudaStream_t stream = 0 )

Initializes or sets device memory to a value.

Parameters

devPtr: - Pointer to device memory
value: - Value to set for each byte of specified memory
count: - Size in bytes to set
stream: - Stream identifier

Returns

cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidDevicePointer

Description

Fills the first count bytes of the memory area pointed to by devPtr with the constant byte value value.

cudaMemsetAsync() is asynchronous with respect to the host, so the call may return before the memset is complete. The operation can optionally be associated to a stream by passing a non-zero stream argument. If stream is non-zero, the operation may overlap with operations in other streams.

Note:

Note that this function may also return error codes from previous, asynchronous launches.
See also memset synchronization details.
This function uses standard NULL stream semantics.

cudaExtent make_cudaExtent ( size_t w, size_t h, size_t d )

Returns a cudaExtent based on input parameters.

Parameters

w: - Width in bytes
h: - Height in elements
d: - Depth in elements

Returns

cudaExtent specified by w, h, and d

Description

Returns a cudaExtent based on the specified input parameters w, h, and d.

See also:

make_cudaPitchedPtr, make_cudaPos

cudaPitchedPtr make_cudaPitchedPtr ( void* d, size_t p, size_t xsz, size_t ysz )

Returns a cudaPitchedPtr based on input parameters.

Parameters

d: - Pointer to allocated memory
p: - Pitch of allocated memory in bytes
xsz: - Logical width of allocation in elements
ysz: - Logical height of allocation in elements

Returns

cudaPitchedPtr specified by d, p, xsz, and ysz

Description

Returns a cudaPitchedPtr based on the specified input parameters d, p, xsz, and ysz.

See also:

make_cudaExtent, make_cudaPos

cudaPos make_cudaPos ( size_t x, size_t y, size_t z )

Returns a cudaPos based on input parameters.

Parameters

x: - X position
y: - Y position
z: - Z position

Returns

cudaPos specified by x, y, and z

Description

Returns a cudaPos based on the specified input parameters x, y, and z.

See also:

make_cudaExtent, make_cudaPitchedPtr